Challenger Seat and Driver Backrest (2020 and Newer)
We offer two different size seats for the 2020 and Newer Indian Challenger. The Midrider Seat will sit you at the same position to the handlebars as the stock seat. The Tall Boy Seat will sit you one and a half inches further back from the handlebars than the stock seat. Both seats have a very similar ride height to the stock seat. The driver section of these seats are 15 inches wide and the passenger sections are a generous 11 inches wide with comfort to spare. We have also lengthened the passenger section of both seats by one and half inches which means that either seat you pick will not rob from valuable passenger seating area.
To optimize our extra length passenger seat add our sissy bar and trunk relocation kit to give your passenger one and half inches more room.
Fitment note: Due to the extra length of our seat, if your bike is equipped with a trunk, our seat requires our relocation kit to be installed.
Ultimate Removable Driver Backrest
All Ultimate Challenger seats have the driver backrest hardware built into them, so you can add the backrest at any time. The driver backrest quickly and easily slides in and out with a built in spring loaded plunger lock that is part of the backrest hardware permanently mounted inside the seat.
- Pad measures 7" high by 10" wide by 1.5" thick.
- Built using the same memory foam as our seats.
- Infinite tilt to match your back angle.
- Backrest folds down forward for easily mounting and dismounting your Challenger.
- Adjustment forward and back is more than 2 inches.
- Adjusts with a thumb screw while you're riding.
- No need to remove the seat or use a wrench.
- Includes zipper storage pouch that velcros to the back of the backrest.
Detachable storage pouch measures 9"W x 6"H and is protected by the driver backrest built in rain flap.
Ultimate Sissy Bar Pad
The large Ultimate sissy bar pad is 12" wide and 8" high. We have engineered the pad with the correct back angle and thickness. This gives your passenger more room and comfort, which helps to eliminate back fatigue on long rides. The Ultimate sissy bar pad bolts right on to your Indian® sissy bar and uses the factory screws.
Use our redesigned sissy bar pad in conjunction with our relocation kit to optimize your passenger spacer and comfort.
Heated Seat Option
We offer both heated and non-heated seats. Our seats plug in directly to the factory accessory plug with a supplied adapter. There are two separate switches that control front and rear indpendently.
Leather Versus Vinyl and Rain Covers
Leather seating in our homes or vehicles works well for some users however leather seats do not weather well left out in the sun and rain.
In my opinion, there are no advantages with a leather seat on a motorcycle.
Most people cannot visually tell the difference between our premium marine grade Vinyl and Leather unless they are side by side and then it needs to be pointed out which is which.
Neither Leather or Vinyl breathes except through the stitching.
Neither seats, Vinyl or Leather are waterproof. A Vinyl seat will let water in through the stitching and Leather will do the same and also soak through the hide if it gets really wet.
Durability is similar but our premium Vinyl will hold its shape and new look longer than Leather.
A rain cover should be used to prevent water from seeping through the stitches into the comfort foam.
We recommend you cover your seats with our waterproof ride on rain covers when your bike is sitting or riding in the rain.
Enjoy the ride again,
|Driver Seat Width||15"|
|Passenger Seat Width||11"|