Our Lowrider seat is designed to sit the driver 1 inch lower and the same distance to the handlebars as the seating position of the Honda® OEM stock seat. We recommend the Lowrider for drivers under 6 foot and/or weighing 220 pounds or less and/or a 32 inch inseam or less. If you are heavier than 220 pounds, the Lowrider will sit you 1" or more closer to the handlebars than the stock seat, depending on your butt size. Our Honda® VTX 1300 R/S/T Lowrider is designed so you sit in the seat, not on the seat. The Lowrider seat is 16 inches wide.
The Ultimate passenger seat is 14" wide with comfort to spare. The passenger seat has been designed with a steeper nose angle to help prevent the passenger from sliding forward into the driver. The same high quality comfort memory foam that is in the driver seat is in the passenger seat, and it has been molded to give your very important passenger the Ultimate support. (put them in comfort heaven).
Honda® OEM passenger seat WILL NOT fit with the Ultimate VTX 1300 R/S/T Lowrider seat. Honda® OEM driver seat WILL NOT fit with the Ultimate passenger seat.
All Ultimate VTX 1300 R/S/T Lowrider seats have the driver backrest hardware built into them, so you can add the backrest at any time.
Detachable storage pouch measures 9"W x 6"H and is protected by the driver backrest built in rain flap.
The large Ultimate sissy bar pad is 12" wide and 8" high. It sits your passenger 10 degrees straighter than the stock pad, which helps eliminate back fatigue on long rides. The pad comes with stainless steel screws and fits on your Honda® sissy bar. We also manufacture sissy bar pads that will fit other aftermarket sissy bars.
When you place your order, we will ask you which make and model sissy bar you have and whether its 2, 3 or 4 bolt mount configuration. We'll also need the measurements, from center of bolt to center of bolt, of where the pad mounts to the sissy bar.
Our standard seat stitching thread color is black. Different embroidered logos and seat stitching thread colors are available. Please see Custom Options tab found above.
Leather seating in our homes or vehicles works well for some users however leather seats do not weather well left out in the sun and rain.
In my opinion, there are no advantages with a leather seat on a motorcycle.
Most people cannot visually tell the difference between our premium marine grade Vinyl and Leather unless they are side by side and then it needs to be pointed out which is which.
Neither Leather or Vinyl breathes except through the stitching.
Neither seats, Vinyl or Leather are waterproof. A Vinyl seat will let water in through the stitching and Leather will do the same and also soak through the hide if it gets really wet.
Durability is similar but our premium Vinyl will hold its shape and new look longer than Leather.
A rain cover should be used to prevent water from seeping through the stitches into the comfort foam.
We recommend you cover your seats with our waterproof ride on rain covers when your bike is sitting or riding in the rain.
Enjoy the ride again,
|Seat Height||1" lower than Honda® OEM Seat.|
|Distance from Handlebars||If you are heavier than 220 pounds, the Lowrider will sit you 1" or more closer to the handlebars than the Honda® OEM Seat, depending on your butt size.|
|Driver Seat Width||16"|
|Passenger Seat Width||14"|
|Location of Backrest Bracket||Rider Seat|
|Passenger Backrest / Sissy Bar Pad|
|Large Pad Height||8"|
|Large Pad Width||12"|
|Seat Compatibility||Honda® OEM passenger seat WILL NOT fit with the Ultimate VTX 1300 R/S/T Lowrider seat. Honda® OEM rider seat WILL NOT fit with the Ultimate passenger seat.|
Please Note: All prices in product descriptions are in U.S. Dollars.
Online Ordering is for the Contiguous United States Only. For All Other Locations - Click Here
Accepted Payment Methods:
©Ultimate Seats 2003-2017