FLH® 2009-2013 Ultimate Touring 1-Piece Seat and Driver Backrest
Our FLH® Ultimate Touring Midrider seat will sit you at the same height as your stock seat and the same distance from the handlebars as the stock seat. The driver section of the seat is 17 inches wide. The passenger section is 15 1/2 inches wide with comfort to spare and is 1 full inch longer than the stock seat.
Ultimate Touring Tall Boy seat will sit you at the same height as your stock seat and 1 1/2 inches further back from the handlebars compared to the stock seat. The driver section of the seat is 17 inches wide. The passenger section is 15 1/2 inches wide with comfort to spare and is a full 1 inch longer than the stock seat.
Our Ultimate Touring seats are designed so you sit in the seat, not on the seat
Ultimate Touring Seat
Ultimate Removable Driver Backrest
All Ultimate FLH® Ultimate Touring seats have the driver backrest hardware built into them, so you can add the backrest at any time. The driver backrest quickly and easily slides in and out with a built in spring loaded plunger lock that is part of the backrest hardware permanently mounted inside the seat.
- Pad measures 7" high by 10" wide by 1.5" thick.
- Built using the same memory foam as our seats.
- Infinite tilt to match your back angle.
- Backrest folds down forward for easily mounting and dismounting your FLH®.
- Adjustment forward and back is more than 2 inches.
- Adjusts with a thumb screw while you're riding.
- No need to remove the seat or use a wrench.
- Includes zipper storage pouch that velcros to the back of the backrest.
Detachable storage pouch measures 9"W x 6"H and is protected by the driver backrest built in rain flap.
Heated Seat Option
We offer both heated and non-heated seats. We supply a jumper with all heated seats that plug into the factory accessory plug. There are two separate switches that control front and rear indpendently.
Ultimate Touring 1-Piece touring seats installs exactly like stock, with the front under tank bracket and the stock rear fender bolt.
Model Year Fitment Details:
- FLHTCU Ultra Classic Electra Glide
- FLHTK Electra Glide Ultra Limited
- FLHTCUL Electra Glide Ultra Classic Low (This seat will sit slightly higher than the stock seat)
- FLHTKL Electra Glide Ultra Limited Low (This seat will sit slightly higher than the stock seat)
- Road Glide® Ultra
- Tri Glide®
Our standard seat stitching thread color is black. Different embroidered logos and seat stitching thread colors are available. Please see Custom Options tab found above.
Leather Versus Vinyl and Rain Covers
Leather seating in our homes or vehicles works well for some users however leather seats do not weather well left out in the sun and rain.
In my opinion, there are no advantages with a leather seat on a motorcycle.
Most people cannot visually tell the difference between our premium marine grade Vinyl and Leather unless they are side by side and then it needs to be pointed out which is which.
Neither Leather or Vinyl breathes except through the stitching.
Neither seats, Vinyl or Leather are waterproof. A Vinyl seat will let water in through the stitching and Leather will do the same and also soak through the hide if it gets really wet.
Durability is similar but our premium Vinyl will hold its shape and new look longer than Leather.
A rain cover should be used to prevent water from seeping through the stitches into the comfort foam.
We recommend you cover your seats with our waterproof ride on rain covers when your bike is sitting or riding in the rain.
Enjoy the ride again,
|Seat Height||Same as the Harley-Davidson® OEM Seat.|
|Distance from Handlebars||1 1/2" further back than the Harley-Davidson® OEM Seat.|
|Driver Seat Width||17"|
|Passenger Seat Width||15 1/2"|
|Location of Backrest Bracket||Driver Seat|